The inclusion of "-rev b-" signifies an update from a previous version (likely "rev a"). These revisions are common in the Cisco Networking Academy and are intended to refine and modernize the learning experience. Key potential changes in the "rev b" version could include:
interface g0/1 switchport trunk encapsulation dot1q (if needed) switchport mode trunk switchport trunk native vlan 99 switchport trunk allowed vlan 10,20,99 no shutdown
In the Chicago Router ( CHG-RTR ), exclude the first 15 addresses of the LAN subnet. ccna-2v7.0 case study -rev b-
Because static paths control global connectivity, the edge routers must run a fully explicit route logic for both IPv4 and IPv6 topologies.
Your primary directive as the network administrator is to establish secure, end-to-end data transmission across all routers, enterprise switches, and end-user workstations. The inclusion of "-rev b-" signifies an update
show cdp neighbors detail : To map your Layer 2 topology and discover connected Cisco devices.
R1(config)# ip dhcp excluded-address 192.168.10.1 192.168.10.10 R1(config)# ip dhcp excluded-address 192.168.20.1 192.168.20.5 Because static paths control global connectivity, the edge
If you are currently studying for your CCNA or working through this case study, I can help you advance. Let me know what you'd like to do next:
I need to gather information about the CCNA 2 v7.0 SRWE curriculum. I should search for "CCNA 2 v7.0 SRWE topics".'ll also search for "SRWE case study Phase 1" to get more details. helpful. Let's search for "CCNA 2 v7.0 case study Phase 1". 1 might be relevant. Let's open it. is for version 6.0, not 7.0.
Switch(config)# ip dhcp snooping Switch(config)# ip dhcp snooping vlan 10,20 Switch(config)# interface GigabitEthernet0/1 Switch(config-if)# ip dhcp snooping trust Use code with caution.
Result 1 might also be relevant. Let's open it. helpful.