Elias closes the housing, ensuring the seal is tight to maintain the IP67 protection. He tests the three LEDs—typically representing Area Status (On/Off/Flashing)—to confirm the keypad is successfully polling the Challenger panel.
Addressing is done during initial setup. This may require entering installer programming mode. Typically, from the main panel, you can enter installer programming and follow the Challenger system's addressing procedure.
Typically used to trigger a low-current local door relay or strike. 3 x System Status LEDs
Use the base as a template to mark screw holes and the rear cable entry point on a flat, solid surface. Secure the base to the wall using suitable screws/bolts. Wiring and Connections : Connect the keypad directly to the Challenger RS-485 LAN
A: Yes, the TS1162 is , making it weather-resistant and suitable for outdoor mounting. ts1162 installation manual exclusive
: Connect to the 12VDC auxiliary power output on the Challenger Panel or Intelligent Access Controller.
This guide is for informational purposes only. All product names and trademarks are property of their respective owners.
can be connected directly to the Challenger RS-485 LAN at this distance Elias connects only
The is a masterpiece of mechatronic engineering, but its performance is ultimately in the hands of the installer. Universal manuals provide generic steps; this TS1162 Installation Manual Exclusive provides the wisdom of thousands of real-world installations, hidden factory parameters, and diagnostic shortcuts that can save days of downtime. Elias closes the housing, ensuring the seal is
Maintain unobstructed airflow to the intake and exhaust vents to ensure the digital controls can accurately monitor air quality. 2. Drainage Installation
The Exclusive Installation Manual for TS1162: Ensuring Precision and Performance
: Use appropriate screws or bolts for the surface material (e.g., masonry anchors for brick or self-tapping screws for metal). Tighten firmly but avoid over-tightening, which can warp the plastic housing. Step 3: Wiring and Connections
Configure the so the 3 LED indicators accurately reflect the arming state of the assigned area(s). Step 3: Configuring the RTE and Alarms This may require entering installer programming mode
Tecom TS1162 is a 3 LED Remote Arming Station (RAS) keypad used with Challenger security systems. It is specifically designed for high-durability needs, featuring an IP67 rating for dusty or wet environments. aritech.com.au Installation Highlights
The TS1162 can be integrated into automated tape libraries or mounted into a standard 19-inch enterprise server rack utilizing a dedicated slide-rail or fixed-tray kit. Mounting inside an Automated Tape Library
Turn the master switch on. The LED indicator should flash amber, indicating "Setup Mode."
Use the provided hardware to secure the unit, tightening screws in a cross pattern to ensure even pressure.