Foxconn N15235 — Front Panel Connectors - Google

The vast majority of Foxconn-manufactured motherboards utilize a standard Intel-style 9-pin design within a 10-pin grid. One pin position is left empty as a "key" so you can easily orient the layout.

Upper Row: [ Pin 2: Power LED + ] [ Pin 4: Power LED - ] [ Pin 6: Power SW ] [ Pin 8: Power SW ] [Empty] ----------------------------------------------------------------------------------------------- Lower Row: [ Pin 1: HDD LED + ] [ Pin 3: HDD LED - ] [ Pin 5: Reset SW ] [ Pin 7: Reset SW ] [ Pin 9: NC ] Use code with caution. Pin Assignment Breakdown Pin Number Wire Connection Label Polarity Sensitivity Hard Drive LED Positive HDD LED + or IDE LED + Yes (Must be Positive) Pin 3 Hard Drive LED Negative HDD LED - or IDE LED - Yes (Must be Ground) Pin 2 Power LED Positive PLED + or PWR LED + Yes (Must be Positive) Pin 4 Power LED Negative PLED - or PWR LED - Yes (Must be Ground) Pin 5 Reset Switch RESET SW or RST No (Omnidirectional) Pin 7 Reset Switch Ground RESET SW or GND No (Omnidirectional) Pin 6 Power Switch POWER SW or PW_SW No (Omnidirectional) Pin 8 Power Switch Ground POWER SW or GND No (Omnidirectional) Pin 9 No Connection / Dummy Leave Empty Pin 10 Missing Pin (Key) No pin on motherboard Step-by-Step Connector Installation

The most common Foxconn configuration uses a arranged within a 10-pin grid block (where one pin is intentionally missing to act as a key guide).

Based on standard Foxconn documentation for this generation of boards, the pins are generally arranged as follows: Foxconn N15235 Front Panel Connectors - Google

If your case wires are single-pin, ensure you match them to the correct function in the chart above.

Connect to Pin 2 and Pin 4 (Bottom row, leftmost two pins).

Connect to the bottom pins toward the right side (Pins 5 and 7). Polarity: Polarity does not matter. Pin Assignment Breakdown Pin Number Wire Connection Label

If the computer fails to start or front panel indicators do not work after assembly, check for these common configuration issues:

Controls the reboot button on your PC case. Pins 5 and 7. Orientation does not matter for this switch.

This board is a classic OEM workhorse. It isn’t flashy, but it gets the job done. However, there is one universal frustration that stops every build dead in its tracks: Connect to the bottom pins toward the right

On the Foxconn N15235, the main front panel header (often labeled ) is typically located in the bottom-right corner of the motherboard. It usually consists of a 9-pin block.

The Foxconn N15235 front panel connectors pinout is as follows:

Verify that the Power Switch connector is sitting on Pins 2 and 4. Ensure your power supply switch on the back of the case is flipped to the "ON" (I) position.