Siemens Hipath 3800 Programming Manual _top_ Jun 2026

Enter the system password. The factory default passwords vary by region and software version, but common defaults include 31994 or 123456 .

Select the target physical port based on your hardware layout.

Always back up the database before making any structural changes to the system. In HiPath Manager E, select . siemens hipath 3800 programming manual

Subscriber Line Module Analog for standard analog devices.

The manual begins with a critical concept: Slot and Port numbering . Unlike IP-based systems that use MAC addresses or extensions, the HiPath 3800 uses a physical bus system. You cannot program an extension without knowing which (Subscriber Line Circuit) occupies which slot in the cabinet. Enter the system password

The Siemens HiPath 3800 is a scalable IP convergence platform for medium to large enterprises, with administration primarily managed through HiPath 3000 Manager or OpenScape Office. Detailed service documentation covering installation and maintenance is available in the HiPath 3000/5000 V9 Service Manual, while user administration guides are found via resources like PBXMechanic. For comprehensive documentation and installation guidelines, refer to the HiPath 3000/5000 V9 Service Manual . Siemens hiPath Manuals for 3000 and 4000 PBX Systems

Go to Lines/Trunks . Identify your digital PRI (DIUT) or analog lines. Set the signaling type (e.g., Euro-ISDN DSS1). Always back up the database before making any

| Command | Function | |---------|----------| | DISPLAY-STATION:<ext> | View extension settings | | ADD-STATION:<ext>,TYPE=<type> | Create new station | | CHANGE-STATION:<ext>,PARAM=VAL | Modify settings | | DELETE-STATION:<ext> | Remove extension | | DISPLAY-COS:<cos_num> | View Class of Service | | DISPLAY-ROUTE:<route_num> | View routing table |