Basic2nd-recovery-system.zip -24 6 Mb- --39-link--39- __exclusive__ Jun 2026

"Basic2nd-recovery-system.zip -24 6 Mb- --39-LINK--39-"

This recovery system is compatible with the following Siemens HMI models: KTP700 Basic / KTP700 Basic DP KTP900 Basic KTP1200 Basic / KTP1200 Basic DP Recovery Requirements Basic2nd-recovery-system.zip -24 6 Mb- --39-LINK--39-

: The screen will show progress indicators as it formats the internal flash sectors and transfers the clean .fwf operating system image. Do not disrupt power or remove the flash drive during this stage. "Basic2nd-recovery-system

The file is a software utility provided by Siemens for performing a "Reset to Factory Settings" on 2nd Generation SIMATIC HMI Basic Panels . It is approximately 24.6 MB in size and is typically used when a device cannot be reached via standard Ethernet or if the operating system is corrupted. Supported Devices It is approximately 24

is a specialized software utility provided by Siemens to facilitate a "Rescue" or "Recovery" mode for HMIs via a USB stick. It is specifically designed for SIMATIC HMI 2nd Generation Basic Panels , including: KTP400 Basic KTP700 Basic / KTP700 Basic DP KTP900 Basic KTP1200 Basic / KTP1200 Basic DP Essential Requirements Before starting, ensure you have the following ready: USB 2.0 or lower and formatted to Device Image : You will need the specific HMI image file (

Before you start, gathering the right materials is crucial. Failing to meet these prerequisites is the number one reason the recovery process fails.

The recovery package provides the boot routine but lacks the actual operating firmware image. You must manually copy the correct .fwf firmware file into the newly created \SIMATIC.HMI\Recovery\ directory.