: The system typically includes a Control Unit with a touch-panel LCD, a Drive Unit for traverse movement, and a Detector with a diamond stylus tip. 2. Detector Calibration (Auto-Calibration)
: For older "SV" series units (like the SV-3100), detailed safety and operational procedures are available through providers like Artisan Technology Group . Key Features for Your Reference
Connect the detector cable to the drive unit, the drive unit to the control unit/PC, and finally, plug in the main power cable. Ensure all grounding connections are secure. 3. Understanding the Control Interface and Software mitutoyo surftest sv400 user manual full
: For detailed analysis, measurement data can be transferred to a PC via RS-232C or stored on a memory card for use with software like FORMTRACEPAK Environment Matters
A: Some user-contributed documentation for Mitutoyo instruments refers to an "Executing all reset" procedure that can be accessed from the setup menu. However, the exact steps are model-specific. Always follow the procedure as outlined in your official SV-400 user manual to avoid inadvertently resetting critical calibration data. : The system typically includes a Control Unit
Calibration must be performed daily or whenever the detector stylus is changed.
Typically up to 50mm or 100mm (depending on the specific drive unit model). Key Features for Your Reference Connect the detector
If you work in a high-precision machine shop or a metrology lab, you know the name . Among their legendary lineup of surface roughness testers, the Surftest SV-400 stands out as a workhorse.