Icom Ic-v80 Programming Software Download |verified| Jun 2026

Accept the licensing agreement and download the .zip archive containing the installation files. Option B: CHIRP Open-Source Software

A free, universal radio programming tool that supports hundreds of radio models, including the Icom IC-V80.

This is the manufacturer's original programming software. It is the standard against which all others are measured.

Select Tone or TSQL if your local repeater requires a PL tone. Icom Ic-v80 Programming Software Download

: Input your receive frequencies, transmit frequencies (or offsets for repeaters), duplex settings (+/-), and sub-audible tones (CTCSS/DTCS).

Before editing anything, always back up your radio's current state:

You need a USB-to-Two-Pin programming cable compatible with Icom radios (specifically standard 3.5mm/2.5mm jacks). Accept the licensing agreement and download the

Wait for the progress bar to complete. You will see a spreadsheet-like grid appear. Editing Frequencies and Settings

To program your Icom IC-V80 , you can use either the official Icom cloning software or a third-party alternative like RT Systems. Official Software & Drivers

: If you are using an Icom USB programming cable (like the Go to product viewer dialog for this item. It is the standard against which all others are measured

Do not touch the cable or turn off the radio while writing. Doing so can corrupt the radio's EEPROM.

If you encounter errors like "No Response From Radio" or "Clone Error," try these troubleshooting steps:

He’d heard whispers on the eHam forums. The IC-V80 was a fantastic analog workhorse, but Icom had long since discontinued it. The official programming software—CS-V80—wasn’t on Icom’s current website. It had been buried in the digital equivalent of a forgotten filing cabinet.