Supports Manual Guide i for generating code without manual G-code input. 2. Understanding the Coordinate Systems
| M-Code | Function | Description | | :--- | :--- | :--- | | | Program Stop | Stops the program execution until the operator presses the cycle start button. | | M01 | Optional Stop | Similar to M00, but the stop only occurs if the "Optional Stop" switch is activated on the operator panel. | | M02 | Program End | Ends the program, but does not rewind it. | | M03 | Spindle On (Forward) | Starts the spindle rotating clockwise (CW). | | M04 | Spindle On (Reverse) | Starts the spindle rotating counter-clockwise (CCW). | | M05 | Spindle Stop | Stops the spindle. | | M06 | Tool Change | Automatically executes a tool change sequence. | | M08 / M09 | Coolant On / Coolant Off | Turns the flood coolant on (M08) and off (M09). | | M30 | Program End & Rewind | Ends the program and returns the program pointer to the beginning. | | M98 | Subprogram Call | Calls a separate subprogram to be executed. | | M99 | Subprogram End | Returns from the subprogram back to the main calling program. | fanuc series oitf plus programming manual
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Supports Manual Guide i for generating code without
Before writing code, you must align with the machine's reference points: : Fixed by the manufacturer. | | M01 | Optional Stop | Similar
This guide breaks down the essential programming elements from the official manuals to help you master the 0i-TF Plus. 1. Traditional G-Code vs. MANUAL GUIDE i
Used for peck-grooving on the outer diameter or cutting a finished piece off the bar stock. G75 R0.5; G75 X30.0 Z-40.0 P3000 Q2000 F0.08; Use code with caution.