Wedo Paket 50 User Manual [Web]

Freezes the weight on the display, useful if the item must be removed to see the screen.

Tip: Start with a lower setting and increase if the seal is weak. If the bag melts or tears, reduce the setting.

: Press the HOLD key again to unlock the interface and return to live tracking mode. Maintenance and Calibration Protocols System Calibration (Zero Adjustment)

| Label | Description | |-------|-------------| | | Power status LED | | RUN | System running / program active | | ERR | Error indicator (blink pattern indicates fault type) | | I/O 1-25 | First bank of digital/analog configurable terminals | | I/O 26-50 | Second I/O bank | | LAN | 10/100 Mbps Ethernet (Modbus TCP / configuration) | | RS-485 | Serial port (Modbus RTU, BACnet MS/TP) | | USB-B | Service port for firmware updates | wedo paket 50 user manual

| PWR | RUN | ERR | Meaning | |-----|-----|-----|---------| | Off | Any | Any | No power or internal fuse blown. | | Green | Blinking slow (1Hz) | Off | Normal operation, no program loaded. | | Green | Blinking fast (5Hz) | Off | Program running, no errors. | | Green | On solid | Off | Program paused via software. | | Green | Blinking | 1 blink / sec | I/O bus error – check terminal connections. | | Green | Blinking | 2 blinks / sec | Watchdog timeout – restart required. | | Green | Blinking | 3 blinks / sec | Ethernet link down. | | Green | Off | 5 blinks / sec | Fatal firmware corruption. Contact support. |

Carefully lower your parcel onto the geometric center of the platform.

Never place objects exceeding 50 kg (110 lbs) on the platform. Excessive weight can permanently damage the internal load cells. Freezes the weight on the display, useful if

No internet connection detected from the main local router.

This user manual provides everything you need to know about setting up, operating, calibrating, and troubleshooting your WeDo Paket 50 scale. Technical Specifications

Verify jumper position (voltage vs. current). Also check that the common ground (GND) is shared between the sensor and the Paket 50. : Press the HOLD key again to unlock

: Never drop packages onto the scale platform forcefully from a height. Sudden impacts create transient kinetic force spikes that exceed 50 kg, warping the internal metal load cells permanently.

Place the empty container (e.g., a box or crate) on the platform. Wait for the display to stabilize. Press the button. The display will reset to 0.00 .

: Features a stainless steel platform (approx. 31 x 32 cm) and a remote digital display that can be wall-mounted. Troubleshooting "Lo" Error

Press the button again. The display will flash the required calibration weight value (e.g., 20.00 kg or 50.00 kg ).