| Feature | GORDAK 952 (Standard) | GORDAK 952A | GORDAK 952S | | :--- | :--- | :--- | :--- | | | 230 V AC, 50/60 Hz | 220 V AC, 50/60 Hz | 230 V AC, 50/60 Hz | | Hot Air Power | 270 W | 270 W (Max) | 650 W | | Soldering Iron Power | 60 W | 60 W | 60 W | | Pump Type | Membrane Pump | Diaphragm / Membrane | Membranous | | Air Flow | 0.16 – 1.2 Nm³/h | 0.3 – 4 L/min | 120 L/min (Max) | | Hot Air Temp Range | 150℃ – 500℃ | 100℃ – 450℃ | 100℃ – 500℃ | | Soldering Temp Range | 200℃ – 480℃ | 200℃ – 480℃ | 200℃ – 480℃ | | Noise Level | < 45 dB | Not specified | < 45 dB | | Host Dimensions (WxDxH) | Not specified | 245 x 184 x 135 mm | Not specified | | Included Accessories | Not specified | 4x Nozzles, Sponge, Stands | 4x Nozzles, Manual, Stands |
If you turn the machine on without removing these, the vibration can cause serious internal damage or even cause the machine to "walk" off your workbench. Key Safety & Operational Updates
Keep the tip tinned with solder to prevent oxidation, particularly when using lead-free solder (refer to 2026 industry standards for proper tinning). 4. Maintenance and Troubleshooting Proper maintenance extends the life of your Gordak 952. gordak 952 user manual updated
If the heating element fails, it must be replaced with a genuine Gordak heater component.
Ensure your outlet is properly grounded. The Gordak 952 is an ESD-safe machine, but that safety only works if the static has a path to the floor. 2. Understanding the Controls The 952 typically features two main segments: Hot Air Rework (Left Side): Air Volume: | Feature | GORDAK 952 (Standard) | GORDAK
| Application | Soldering Iron Temp (°C) | Hot Air Temp (°C) | Air Flow (Scale 1-10) | | :--- | :--- | :--- | :--- | | | 350 - 380 | 340 - 380 | 3-6 | | Leaded Solder (Sn63/Pb37) | 310 - 340 | 300 - 340 | 2-5 | | Large Ground Plane / Connectors | 380 - 420 | N/A | N/A | | SMD Chip Resistors / Capacitors | 320 - 350 | 280 - 320 | 3-4 | | SOIC / QFP ICs (64+ pins) | N/A | 330 - 360 | 4-7 | | BGA Rework (Underfill removal) | N/A | 360 - 400 | 5-8 | | Plastic Components (JST Connectors) | 250 - 280 | 180 - 220 | 1-3 | Note: Always decrease airflow for small components to prevent "blowing away" the part.
Set the to the profile required for your solder type (typically 320°C–350°C for leaded solder, 370°C–400°C for lead-free solder). The Gordak 952 is an ESD-safe machine, but
Gordak 952 User Manual Updated: Complete 2-in-1 Rework Station Guide (2026 Edition)
"Unit 952?" he called out, feeling foolish.
The remains a staple in electronics repair shops, makerspaces, and ASIC miner maintenance hubs due to its robust, 2-in-1 design combining a hot air gun and a soldering iron . As of 2026, proper operation of this versatile tool requires understanding both its fundamental functions and maintenance to ensure longevity, particularly when handling lead-free solder.