Control Universal Articco Th-msur-40 Manual «360p — HD»

Resetting your remote can resolve most software glitches and is a good first step in troubleshooting.

Before programming your remote, you need to prepare it for use.

: Solution : This is often due to a power surge or the batteries being removed for too long. Simply repeat the setup or manual code entry process from Chapter 2. Keep a note of your AC's code so you can quickly re-enter it.

: A convenient one-touch feature for quick climate adjustment.

This comprehensive operating manual and guide provides step-by-step programming methods, advanced setting functions, and troubleshooting workflows to ensure your ductless mini-split or portable AC operates flawlessly. Technical Specifications Summary Specification Over 4,000 variants (Mini-splits, window, and portable ACs) Power Source 2 x AAA Alkaline Batteries (not included) Display High-contrast LCD with background illumination Signal Range Up to 8 meters (approx. 26 feet) Memory Retention Built-in non-volatile code memory during battery changes Programming Methods To establish communication between the Articco TH-MSUR-40 Go to product viewer dialog for this item.

Try using the mode or temperature buttons to ensure all functions work. If not, repeat the process. 4. Setting the Clock and Timer Functions Setting the Clock

Point the Articco remote directly at the air conditioner receiver window.

Integrated LCD background display with real-time clock. Signal Type: Infrared (IR) transmitter.

Provides clear feedback on settings, including room temperature and timer settings.

Keep holding the "SET" button as the remote cycles through codes automatically.

| Code | Parameter | Range | Default | | :--- | :--- | :--- | :--- | | SP | Temperature Setpoint | -50 to +150°C | 22.0°C | | HY | Hysteresis (Differential) | 0.1 – 10.0°C | 1.0°C | | C/F | Unit | C / F | C | | AH | High Temp Alarm | SP to +150°C | 35.0°C | | AL | Low Temp Alarm | -50 to SP °C | 5.0°C | | SP_H | Humidity Setpoint | 10 – 95% RH | 60% RH | | HY_H | Humidity Hysteresis | 1 – 20% RH | 5% RH | | MODE | Control action | H/C (Heating/Cooling) | C (Cooling) | | SEn | Sensor type | Pt / ntc / 420 | Pt (PT100) |