Connect the Ikegami OCP (Operation Control Panel) to the "CP" port using a standard control cable.
Ikegami BSF-300 is a compact, 1.5RU digital base station designed for uncompressed, high-quality picture transmission over short to medium distances. Often paired with the FA-300 Fiber Adapter and cameras like the
Press the button on the front panel or the attached Remote Control Panel (RCP).
SMPTE-304M fiber connector or Lemo/Fischer triax connector depending on the installed module. ikegami bsf-300 manual
D-sub or multi-pin connectors interfacing with house intercom systems (RTS, Clear-Com, or Riedel) and switcher tally matrices. 3. Installation and Setup Procedure
| Pin | Signal | Pin | Signal | |-----|--------|-----|--------| | 1 | GND | 5 | Video + | | 2 | Video - | 6 | +12V Power | | 3 | Remote Data A | 7 | Remote Data B | | 4 | Shield/Chassis | - | - |
You can configure individual BNC outputs. For example, set to 1080i (Clean), SDI 3 to 720p (Down-converted), and SDI 4 to PM (Picture Monitor with menu text overlay enabled). Intercom Level Matching Path: MENU > AUDIO/INTERCOM Connect the Ikegami OCP (Operation Control Panel) to
Inspect the fiber tips for dust. Clean if necessary using a dedicated fiber cleaning tool. Align and firmly lock the SMPTE fiber cable into the CAMERA connector on the rear panel.
Connect a tri-level sync or black burst reference signal to the Genlock input.
Real-time monitoring of power supply voltages and internal temperatures. 4. Basic Troubleshooting Tips Installation and Setup Procedure | Pin | Signal
: Works with HDK-97A, HDK-79EXIII, and HDK-55 cameras.
: At only 1.5 RU (Rack Units) in height, it is ideal for space-constrained environments like mobile production trucks and portable flypacks. BSF-300(L) - ikegami
Here is an interesting, user-centric guide to the Ikegami BSF-300, written for the enthusiast, the collector, and the curious.
Route the HD-SDI OUT channels directly to your production switcher or video router matrix.