Wittmann Tempro Plus D 360 Manual Jun 2026

Used for testing or mold filling. Access via . Allows direct control of:

Connect the unit’s outlet to the mold inlet, and the mold outlet back to the unit’s return port.

The is a high-performance, pressurized water temperature control unit (TCU) designed for precise mold tempering. This unit is specifically engineered for high-temperature applications where standard open systems cannot operate safely or effectively. Core Technical Specifications Tempro Plus D 360

Understanding the physical and operational limits of the Tempro Plus D 360 prevents equipment damage and optimizes cycle times. Wittmann Tempro Plus D 360 Manual

| Interval | Action | |----------|--------| | Daily | Check for leaks at all hose connections. Inspect the sight glass for discoloration (rust indicates corrosion). | | Weekly | Clean the external air intake grille. Verify that cooling water outlet is not blocked. | | Monthly | Test the pressure relief valve by lifting the manual lever (wear protective gloves). Clean the Y-strainer on the cooling water inlet. | | Quarterly | Calibrate the flow meter using a bucket and stopwatch. Descale the pump housing if hard water is used. | | Annually | Replace pump mechanical seal (kit order no. 427.981). Replace contactors if cycle count > 500,000 (check in diagnostics menu). |

The D 360 uses a Pt100 sensor (Class A) located at the mold return. For critical processes, you can apply an offset:

Inspect mold connections, hoses, and the floor beneath the unit for water leaks. Monitor Parameters Used for testing or mold filling

Are you looking for a reliable and efficient temperature control unit for your industrial or laboratory applications? Look no further than the Wittmann Tempro Plus D 360. This high-performance unit is designed to provide precise temperature control, and with its comprehensive manual, you'll be able to get the most out of your investment.

Verify pump pressure matches historical baselines for the running mold. Monthly Maintenance

Ultimate Guide to the Wittmann Tempro Plus D 360 Temperature Control Unit | Interval | Action | |----------|--------| | Daily

The unit will automatically initiate its . The internal pump will pulse to force trapped air out of the mold channels and vent it out of the system.

Reduces energy consumption by lowering pump speed to 30% and setting a temperature offset of -20°C from the setpoint. Reactivates automatically after 30 minutes or upon touch.