Caraflo V200 Shower Instructions -

: Ensure your vehicle’s water pump is switched on at the main control panel and that there is sufficient water in your onboard tank or external supply. Activate the Water Heater

Operating the V200 is straightforward, involving two primary controls usually located on the valve handles:

Refit the handle onto the spindle so that the 38°C mark (or safety button alignment) aligns perfectly with the reference mark on the valve body.

If you haven’t used the shower in a while, turn the temperature dial to "Cold" and run the water until it flows steadily. This clears air locks. caraflo v200 shower instructions

: The opposite knob features an integrated safety override button set at 38°C .

Turn off the water supply to the shower unit.

Place the decorative chrome concealing plates (escutcheons) over the wall connectors. : Ensure your vehicle’s water pump is switched

Using the Caraflo V200 daily is simple: turn the bottom lever to control the water flow, and the top lever to set the temperature. However, the most critical part of the instructions is preparing the shower for cold weather to avoid expensive repairs:

Fully NCC Certified, WRAS Approved, and TMV2 Scheme Compliant for safety Step-by-Step Installation Instructions

The Caraflo V200 shower is a popular and highly-rated shower system designed for individuals with mobility issues or disabilities. It provides a safe and comfortable showering experience, allowing users to bathe independently with ease. In this article, we will provide a step-by-step guide on how to use the Caraflo V200 shower, including assembly, installation, and operating instructions. This clears air locks

accommodates standard 45mm pipe holes and works seamlessly with pre-formed shower pods.

Insert the rubber sealing washers into the fixing nuts of the Caraflo V200 valve body. Align the valve nuts with the wall connectors.