Get Top Secure Exam Platform
Download Now
Before starting, download and install these mandatory files on your Windows PC:
A loose connection during the flashing process can permanently corrupt the device hardware.
While holding the key, connect the phone to your PC via the USB cable.
After the phone reboots, perform the following checks:
Which is your computer running?
: Turning the phone off, holding a "boot key" (often the center button or a specific keypad combo), and plugging it into a PC.
Once the tool interface opens, click on the (Load Packet) located at the top-left corner.
Click the in the tool to safely conclude the session. Disconnect your Nokia TA-1304 from the USB cable.
Extract both the Nokia TA-1304 firmware package and the SPD Upgrade Tool archive into separate folders on your desktop for easy access. Step 3: Launch the SPD Upgrade Tool nokia ta1304 flash file pac file
A backup of your personal data (flashing will erase all internal storage). The necessary software drivers and tools (listed below). Step 1: Download Required Files
The contains all the partitions (prog_nand_fdl, prodinfo, vbmeta, etc.) wrapped into one container. This prevents users from accidentally mixing mismatched partitions.
First, it's important to be certain about your device's model. The Nokia TA-1304 is the model number for the , a basic single-SIM feature phone [19†L4-L5]. It was announced in July 2019 and released the following month. If your device has a different model number (like TA-1174), please look for the correct firmware for that specific device.
Configure Settings: Click on the "Start Downloading" button (the play icon). Connect Your Phone: Power off your Nokia TA-1304 completely. Before starting, download and install these mandatory files
Unplug the USB cable, remove the battery momentarily, reinsert it, and power on the device. Troubleshooting Common Errors
Are you currently facing a like "Fail to boot FDL" while trying to flash your device? Nokia 105 (TA-1304 SS) Pink - - IT - MOBILES
Revives dead phones caused by corrupted partitions or bad OTA updates.
Remove the battery for 5 seconds, reinsert it, and power on the phone. : Turning the phone off, holding a "boot