This file is used as the first part of a two-step manual recovery process. Only attempt this if your base station is already non-functional, as it carries a small risk of making the issue worse.
DFU or vendor tool: use vendor utility to read partition into host file. Or use JTAG/UART to read eMMC.
. This specific file is typically used when a base station is "bricked"—often indicated by a blinking red light or a failure to communicate after a firmware update. How to use this rescue file: Connect to PC lighthouse-tx-htc-2-0-calibration-rescue-244.bin
usually indicates a . While often software-related, this error can stem from internal sensor failures, laser issues, or corrupted firmware during an update.
The lighthouse_tx_htc_2_0-calibration-rescue-244.bin file is more than just a piece of data; it's a crucial tool in the VR community's arsenal for hardware repair. It represents a collaboration between Valve and HTC to provide a lifeline for users when automated software updates fail. This file is used as the first part
Every HTC Vive tracker, controller, and headset contains an onboard EEPROM (Electrically Erasable Programmable Read-Only Memory) chip. This chip stores factory-calibrated values unique to that specific device, detailing: Diode positioning and geometry Photodiode optical characteristics
If you own this file from a specific source (e.g., a GitHub issue, Discord community, or a friend), please share where it came from. Otherwise, for safety, do not flash it. Let me know which direction you’d like me to take. Or use JTAG/UART to read eMMC
What is SteamVR throwing (e.g., Error 10001)?