sudo dkms add -m ck710-ue -v 1.2.3 sudo dkms build -m ck710-ue -v 1.2.3 sudo dkms install -m ck710-ue -v 1.2.3

: Before running the software, turn off the printer, hold the Feed button

Last updated: October 2025 – This article is maintained by the industrial automation community. Corrections and updates are welcome.

: Connect the printer via USB first; Windows may detect it as a "Generic/Text Only" printer, but installing the specific CK710 driver is recommended for full features like the auto-cutter. Ethernet (LAN) Setup Configuration Tool

The CK710-UE designation typically refers to a specialized interface controller, keyboard encoder, or embedded system module used in industrial, medical, or high-performance commercial environments.

Visit the manufacturer's website and search for the latest driver for your printer model and operating system. Download and run the installer, following the on-screen instructions.

Provides a bridge to flash the device’s onboard memory with stability patches from the manufacturer.

Choose , and set the type of port to Standard TCP/IP Port .

The driver functions by establishing a virtual or physical communication port (USB or TCP/IP for Ethernet).