Click the "Forgot Password" or question mark icon next to the login field on your local DVR monitor interface.
The engineer instructed John to:
Check the current displayed on your DVR’s monitor. Enter that specific date into the app.
Enter the generated 6 or 8-digit code into the login window. 2. Default Credentials
"Stringer: measuring the importance of static data comparisons" raysharp+dvr+password+reset+top
After-sales service contact. Telephone:400-6211-999. 0756-6869002. E-mail:support@raysharp.cn. 安联锐视 Zhuhai RaySharp Technology Co., Ltd
: On the main local monitor login screen, click "Forgot Password" or "Forget Password" .
Marcus stared at the monitor. It displayed a single, mocking window: a login prompt for the Raysharp DVR system. The cursor blinked in the password field.
: Removing the CMOS battery (the silver coin cell) for a few minutes will reset the system clock to a factory date (often 01/01/2000). This allows you to use a known default super password associated with that specific date. Remote and Software Tools Click the "Forgot Password" or question mark icon
If your Raysharp DVR is disconnected from the local network or internet, the QR method might not be accessible. Older or mid-generation Raysharp units (such as the popular KIT41, KIT61, and KIT81 series) can be unlocked using an algorithm that pairs the current system date with the device's MAC address. Step-by-Step Instructions:
| Action | Why it helps | |--------|---------------| | Set security Q&A | Quick reset without tools | | Register DVR online | Remote password recovery | | Note admin password in secure place | Prevents need to reset | | Update firmware | Some resets are buggy on old FW |
Note: If these credentials do not work, it means a custom password was created during initialization, and you must use one of the reset paths below. 2. The QR Code & Config Tool Method (Recommended)
Raysharp DVRs are reliable for surveillance, but forgetting the admin password can lock you out completely. Below are the to reset a Raysharp DVR password — from easiest to advanced. Enter the generated 6 or 8-digit code into the login window
Older RaySharp devices and specific firmware iterations use a mathematical algorithm based on time metrics and hardware addresses.
Not comfortable opening hardware? Skip to Method 4.
Use a "DVR Super Password Generator" (common for H.264 DVRs).