Usbtv007 Driver Windows 10 64 Bit Guide
to a USB port (preferably USB 2.0, not 3.0). Open Device Manager (Right-click Start > Device Manager).
If you only want to use this device with OBS or VLC, you can install Zadig (a USB driver installer). This replaces the driver with a generic WinUSB/LibUSB driver. It works flawlessly for capture software but removes the device's "webcam" compatibility.
Check the box that says and select Windows 7 or Windows XP (Service Pack 3) . Click Apply , then OK . Step 3: Install the Driver
In the properties window, change the Device drop-down to (or your corresponding device name).
In OBS, go to the Video Capture Device properties, scroll down to Audio Output Mode , and change it from Capture audio only to Output desktop audio (WaveOut) or DirectSound . Alternatively, you can add a separate Audio Input Capture source and select your capture card's audio device. Usbtv007 Driver Windows 10 64 Bit
Look for a device with a yellow exclamation mark. It is usually listed under Other Devices as "OEM Capture" or "Unknown Device". Right-click the device and select . Choose Browse my computer for drivers .
The software bundled on the original mini-CD is often outdated and difficult to use on modern systems. Instead, use:
Once the installation finishes, it is highly recommended to . Step 4: Verify the Installation in Device Manager
Always scan downloaded files for viruses, and ensure the files are from a trusted community source. to a USB port (preferably USB 2
Connect the video grabber directly to a motherboard USB slot. Press Windows Key + X and select .
Do not rely on the CD that came in the box. You need a dedicated 64-bit driver package that supports the USB\VID_1B71&PID_3002 hardware ID, which corresponds to the USBTV007 chipset.
Windows installs a generic driver (often labeling the device as USB 2.0 AV Capture ), but no capture software can actually display a video feed.
Use this GitHub repository maintained by the community for EasyCap-SM-USB-007-Windows-10-x64-drivers . This replaces the driver with a generic WinUSB/LibUSB driver
The is a critical software component for a common "clone" of the EasyCap video capture device, used to convert analog signals from VCRs, camcorders, or retro gaming consoles into a digital format. While the hardware is inexpensive and widely available, users on Windows 10 64-bit frequently face compatibility hurdles because the original drivers were often designed for older operating systems like Windows 7. Bridge Between Eras
Your PC will boot into Windows normally, allowing unsigned driver installation for this session. Step 2: Manual Driver Installation
The audio input is actually a separate USB audio device. Solution: The Usbtv007 exposes two devices: a video capture and a mono/stereo audio input. Look in Device Manager under "Audio inputs and outputs" – you should see "USB Audio Device". Set this as your default recording device in Windows Sound settings.