Labview 2017 Is Missing [portable] - Nidaqmx Driver Support For

To resolve the issue of missing NIDAQmx driver support for LabVIEW 2017, try the following solutions and workarounds:

If you don't have the original media, you can download the driver separately from the NI website. However, you must be careful about versioning.

If LabVIEW 2017 was installed after the NI-DAQmx driver, the driver's installer could not "see" the LabVIEW directory to place the necessary support files.

Open the or use the "Reset Configuration Data" utility within MAX (Tools -> Hardware Configuration Utilities).

Note: This is the safest method because the drivers included on the LabVIEW 2017 media are guaranteed to be compatible with that specific version.

NI-DAQmx 20.7 is the highest version that supports LabVIEW 2017.

Follow these steps in order to diagnose and resolve the issue.

If you already have a compatible version (17.0–20.7) installed but the VIs are missing: Open (NIPM). Go to the Installed tab and find NI-DAQmx .

If you are certain the driver is installed but the icons are missing from the palette: In LabVIEW, go to .

Download the latest compatible version from the NI website.