Gunnebo Speedstile Fl Installation Manual

Place metal shims under the cabinet base if leveling adjustments are required.

Rotate the motor drive shaft manually to the fully closed position.

Gunnebo SpeedStile FL Installation Manual: The Complete Guide gunnebo speedstile fl installation manual

Follow these procedures to ensure the units are aligned and secured correctly: Gunnebo SpeedStile FL

Adjust the opening/closing speed based on site traffic needs. Place metal shims under the cabinet base if

: The floor must be level within +/- 5mm over the entire footprint of the SpeedStile unit.

Check the shock indicator labels on the shipping crates. Document any transit damage immediately. : The floor must be level within +/-

Standard mechanical and electrical tools are required for installation. According to the manual, ensure you have the following available:

Always isolate the main power grid before handling any electrical connections. Electrical work must comply with local national wiring regulations. Power Connections

: Children must be supervised by an adult at all times in the vicinity of an active lane. When an adult escorts a child through the lane, the child must always proceed ahead of the adult.

Connect the open-collector or dry-contact outputs from your access control panel to the Volg_L (Left Passage) and Volg_R (Right Passage) terminals.