Hp Fxn1 E93839 Motherboard Specs Updated
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Integrated Realtek HD Audio jacks (Line-In, Line-Out, Microphone). Networking: 1 x Gigabit Ethernet port (RJ-45).
Integrated Intel HD Graphics (dependent on CPU); supports discrete low-profile GPUs
Officially supports 2nd Gen Intel Core i3, i5, and i7 processors, such as the Core i5-2400. While physically similar to LGA 1150/1151, it is not compatible with newer 4th-gen or 6th-gen CPUs. Memory Architecture: hp fxn1 e93839 motherboard specs updated
Integrated Realtek High Definition Audio (3-line jacks for mic, line-in, and line-out). Networking: 1 x RJ-45 Gigabit Ethernet port.
Modified/Proprietary (specifically for Elite 8200 chassis) Memory 4 DIMM slots; supports DDR3 SDRAM (1333 MHz) Max RAM
Intel 2nd Generation (Sandy Bridge) Core i3, i5, and i7 processors. Memory: Type: DDR3 Non-ECC SDRAM. Slots: 4 DIMM slots. Maximum Capacity: Typically 32GB (8GB per slot). This public link is valid for 7 days
The HP FXN1 (E93839) is a custom, proprietary motherboard designed for HP’s business and consumer All-in-One PC lineup from the . It is not a standard retail board and follows HP’s unique form factor, power delivery, and I/O layout. It is typically paired with 6th gen (Skylake) or 7th gen (Kaby Lake) Intel processors.
📐 – The physical mounting screw layout is a "modified ATX" or custom Micro-ATX shape. It will not easily drop into a standard third-party PC case without physical modification.
HP's BIOS is often locked. Overclocking is not possible. Can’t copy the link right now
Locate the yellow or blue button on the motherboard labeled or BB . Turn off the PC, unplug the power cord, press and hold this button for 5-10 seconds, then plug it back in. Alternatively, remove the CR2032 coin-cell battery for 5 minutes to reset the BIOS settings to factory defaults.
While the mounting holes roughly align with Micro-ATX specifications, the front panel power switch header uses a non-standard pinout. If you transfer this board into a standard computer case, you will receive a "Front Audio Not Connected" or "Front Fan Not Detected" error code on boot. You will need to manually map the power switch pins or bypass the warnings by pressing F1 during startup. 3. Graphics Card Clearance
; supports up to 32GB (Non-ECC, Unbuffered) Storage 2-4 SATA ports (SATA II/III support depending on revision) Expansion
| Date | Update | |------|--------| | 2026-04-12 | Initial long-form report – added NVMe support clarification, fan connector warning, chipset variants, and memory max confirmed. |