Thyssenkrupp Levant Stair Lift Installation Manual Full !!top!! (2024)

Carefully slide the drive unit onto the rail from the top or bottom (depending on your model’s specific entry point).

Connect the main wire harness from the seat (which carries signals from the armrest controls and safety switches) into the matching receptacle on the top of the carriage. Ensure the plug clicks into place. Step 6: Securing the Rail to the Stairs

Install the support legs or feet that attach the rail to the steps. Ensure the rail is level and properly spaced along the flight of stairs.

Refer to fault code table in manufacturer’s control-box documentation for specific error codes and corrective actions. thyssenkrupp levant stair lift installation manual full

: The motor/drive unit is slid onto the rail. Ensure the rack-and-pinion teeth are correctly engaged. Charging Contacts

If you’re a who lost the digital copy, I can guide you on accessing TKE’s dealer portal.

: Uses an aluminum track with a rack and pinion drive system. Installation Step-by-Step Overview Carefully slide the drive unit onto the rail

The ThyssenKrupp Levant typically arrives in three separate boxes. Carefully unpack and inventory the following primary components:

The Levant rail mounts directly to the stair treads, never to the wall. It can be installed on either the left or right side of the staircase. Step 3.1: Laying Out the Rail

: Install the charging contact strip along the rail and connect the transformer to a standard 220V/110V wall socket . Step 6: Securing the Rail to the Stairs

Mount the copper charging contact strips at the absolute top and bottom limits of the rail.

Slide the mounting brackets into the T-slots located on the underside of the rail.