Dvb01 User Manual [best] [ Must See ]

The is a multifunctional voltage monitoring controller designed for industrial-grade accuracy and versatile voltage measurement. It is commonly used in battery management (charging/discharging) and overload protection scenarios. Core Technical Specifications

Functions as an alert system, activating an alarm when voltage goes out of the specified range. 4. Setting Up and Using the DVB01

The relay pulls in when the voltage is between the lower and upper limits; it disconnects if the voltage goes outside this range.

Relay closes only when the measured voltage is between the upper and lower limits. F-05 (Out-Interval Pull-in): dvb01 user manual

to set delay times for relay switching to prevent rapid toggling. 6. How to Calibrate (P-6)

Tap the to move the flashing cursor to the next digit position.

Plug the 5V DC adapter into the unit and a power outlet. F-05 (Out-Interval Pull-in): to set delay times for

is a versatile, industrial-grade multifunctional voltage monitoring controller designed for high-accuracy voltage measurement and control. It is commonly used in applications requiring automatic battery monitoring, voltage protection, and load switching.

Ensure your DC supply capacity is adequate, especially when driving motors (which may draw their rated current at startup). 4. Operational and Setting Modes

+-------------------------------------------------+ | [+] V+ (Module Power In) | | [-] V- (Module Power Ground) | | | | [+] V_IN (Voltage Measuring Input) | | | | [ ] NO (Normally Open Relay Contact) | | [ ] COM (Common Relay Contact) | | [ ] NC (Normally Closed Relay Contact) | +-------------------------------------------------+ 1. Module Power Input (Left Terminals) and load switching.

): Relay stays active ("On") only when the voltage is outside the set limits (either higher than the upper or lower than the lower limit).

Tap the repeatedly to cycle through the options ( F-1 , F-2 , F-3 , F-4 , F-5 ). Tap the SET button once to lock in your selected function. Step 2: Programming the Voltage Thresholds (V1 and V2)

Mode F1: Voltage Monitoring (Window Comparator - Normal Close)