Jobmate — 1500 Manual

Back both jaws out completely to the maximum open position to reset the tracking. Frame wobbles during use Cause: Loose leg bolts or uneven flooring.

Attach fiberglass cutoff wheels to slice through thin metal screws.

High-speed rotary tools present unique hazards. Always adhere to these basic safety rules:

Tubular steel with a folding mechanism for flat storage. jobmate 1500 manual

Yes (eliminates the need for a grounded three-prong plug) 2. Safety Guidelines and Precautions

Use a face mask if the cutting operation creates dust. Technical Specifications Specification Model Jobmate 1500 Power Rating 120V, 60Hz Load Capacity Varies by configuration (bench vs. tool mode) Primary Use Clamping, cutting support, light-duty machining Assembly and Setup Instructions

Lightweight enough to hang on a wall or slide under a bed. 2. Assembly and Setup Back both jaws out completely to the maximum

The Jobmate 1500 excels due to its adaptability. Below is how to utilize its core mechanical features. Using the Clamping System

Always wear protective eyewear and work gloves during operation. Technical Specifications

The Jobmate 1500 relies on high speed rather than high pressure to do its work. Let the tool do the job at its own pace. Selecting the Right Speed High-speed rotary tools present unique hazards

If storing the generator for more than 30 days, drain the fuel tank and carburetor to prevent fuel degradation and carburetor clogging. 4. Troubleshooting the Jobmate 1500 Go to product viewer dialog for this item.

Ideal for drilling, carving, and standard sanding tasks.

Removable collar that protects the front threads. On/Off Switch: Slides or flips to control power.

Clean the air filter frequently, especially if operating in dusty conditions. Replace it if it is dirty or damaged.