Failed -remote 39-flashing Lock Flag Is Locked. Please Unlock It First 39-- ~repack~ Official

Fastboot sometimes glitches on USB 3.0 or AMD-based systems. Plug your cable into a USB 2.0 port or use a USB hub.

: Once OEM Unlocking is enabled, reboot the device into Fastboot mode and use one of the standard unlock commands: fastboot flashing unlock (Standard for newer devices) fastboot oem unlock (Common for older models)

If this is a printer error, please clarify: Fastboot sometimes glitches on USB 3

If your device still boots normally into its stock Android operating system, you must toggle the software allowance switch first. Disconnect your device from the computer.

To avoid re-encountering the error, do not run: Disconnect your device from the computer

Because different manufacturers utilize custom Fastboot arguments, execute the following commands in sequence until the device screen prompts you to confirm a system wipe: fastboot flashing unlock Use code with caution. Legacy device command variations: fastboot oem unlock Use code with caution. or fastboot oem unlock-go Use code with caution.

If you try to run commands like fastboot flash boot , fastboot flash recovery , or fastboot flash system while in this state, the bootloader rejects the write request, triggering this error. Prerequisites Before Unlocking or fastboot oem unlock-go Use code with caution

If you are just trying to get your phone to boot normally and it is stuck on this screen, try selecting Normal Boot from the Fastboot menu using the volume and power buttons. specific unlocking steps for a certain phone brand like Motorola or Xiaomi?

Ensure you have ADB and Fastboot drivers installed on your PC.

Troubleshooting "Failed -Remote 39-Flashing Lock Flag Is Locked. Please Unlock It First 39--"