X
X
Navigate to File > Send/Receive and select the appropriate format (e.g., SDR 33/31 ).
Imported points can be viewed and basic COGO calculations (e.g., inverse distance, bearing, offset) can be performed within the interface.
"That's because this is a tool, not a toy," Elias said, connecting the serial cable to the back of the Toughbook. He opened the Sokkia Prolink 1.15 interface.
Version 1.15 was notably distributed as a stable final version around 2008. sokkia prolink 1.15 software
If you have determined that ProLink is the right tool for your legacy workflow, here is how to approach it:
: It can convert proprietary SDR data into more common formats, such as CSV, DXF, or simple text files.
: Establishes serial communication with total stations to retrieve field data or upload coordinate files for setting out. Format Conversion Navigate to File > Send/Receive and select the
: Designed to run efficiently on Windows operating systems without requiring extensive hardware resources. Step-by-Step Data Transfer Guide
If the connection fails, your COM port number is likely wrong. Check Windows Device Manager under “Ports (COM & LPT).”
Sokkia ProLink 1.15 is a specialized communications and data-management software used in the surveying and geospatial industries to interface with Sokkia total stations, GNSS receivers, and data collectors. Designed to support field-to-office workflows, ProLink enables surveyors to transfer measurement data, set up instruments remotely, configure project parameters, and manage coordinate systems and job files. Version 1.15 represents an iteration focused on reliability, device compatibility, and streamlined data handling. He opened the Sokkia Prolink 1
While Sokkia ProLink 1.15 is not a modern solution, it remains an essential tool for surveyors maintaining legacy Sokkia hardware. For new workflows, consider upgrading to MAGNET Field, but keep ProLink 1.15 archived for emergency data recovery and instrument servicing.
| Issue | Workaround | |-------|-------------| | No driver for Windows 11 | Use a virtual machine (e.g., VirtualBox with Windows 7) or a legacy laptop. | | USB-to-Serial not recognized | Install FTDI or Prolific chipset drivers before connecting the cable. | | Large job files (>1 MB) transfer slowly | Transfer in smaller batches or use SD card direct read. |
