Skope Heated Towel Rail Timer Instructions Now

If your wall switch is an dedicated boost timer, simply tap the boost button until the LED light aligns with your desired duration (e.g., 2 hours). The rail will automatically heat up and shut off safely when the countdown concludes. Recommended Heating Schedules for Efficiency

The timer counts down to zero and safely isolates the power.

Benefit: Rail is hot when you wake up, stays hot during your shower, and remains on long enough to dry the damp towel afterward. Block 1 ON: 06:00 AM | Block 1 OFF: 09:00 AM Block 2 ON: 06:30 PM | Block 2 OFF: 09:30 PM skope heated towel rail timer instructions

Skope controllers generally feature three main operating modes. You can toggle between these by pressing the Mode button briefly (without holding it).

Switch the unit OFF and then back ON quickly (within 10 seconds ) to add 1-hour increments to the heating period. If your wall switch is an dedicated boost

Press and hold the SET button for 3 seconds. The display will flash the minutes .

Press the dedicated button repeatedly to choose a fixed runtime (typically 30 minutes, 1 hour, or 2 hours). Benefit: Rail is hot when you wake up,

To assist you, here are instructions for the most common timer types often associated with these installations. 1. Heirloom Timekeeper Plus (Single Button)

Depending on your Skope model, your timer will likely fall into one of three common categories. Find the one that matches your rail.