[C]: Configure TFTP parameters. [R]: Review TFTP parameters. [T]: Initiate TFTP firmware transfer. [F]: Format boot device. [I]: System information. [B]: Boot with backup firmware and set as default. [Q]: Quit menu and continue to boot. [H]: Display this list of options.
| Item | Default Value | | :--- | :--- | | | 192.168.1.99 | | Subnet Mask | 255.255.255.0 | | Username | admin | | Password | (Leave this field completely blank / empty) | | Console Port BAUD Rate | 9600 | fortigate 30d factory reset full
: Power on the FortiGate 30D. As soon as the bios text appears, repeatedly press any key to interrupt the boot sequence. [C]: Configure TFTP parameters
Before starting any of the procedures below, ensure you have the following ready and have noted these critical warnings. [F]: Format boot device
Release the button. The device will proceed to boot up with factory default settings.
Once reset, the default management IP address for the FortiGate 30D is 192.168.1.99 on internal interface ports. Method 1: Reset via the Command Line Interface (CLI)
To access the Graphical User Interface (GUI) after the reset: