A Phase Controller (or Phase Angle Controller) is a type of power regulator that controls the amount of voltage/current supplied to a load by switching on the AC supply for a portion of each half-cycle.
: Monitors for significant voltage differences between phases that could lead to overheating. Technical Specifications
To ensure safe and efficient operation of the GMR32B phase controller, it is essential to follow the guidelines outlined in the manual. Here are some key points to consider:
Replacement units and detailed model variations (like the 6060009) are commonly available through industrial suppliers like AliExpress wiring diagram summary for a specific application, or do you need help troubleshooting a particular phase fault light? gmr32b phase controller manual
The GMR-32B features five LED indicators to communicate the system's status at a glance: Indicates healthy power and correct phase sequence.
Power the system. A green LED indicates a correct phase sequence. If the red LED lights up, it indicates a phase error. LED Indicator Meanings
The GMR32B features an onboard digital display and navigation keys ( Set , Up , Down ) to customize parameter behavior. Navigating the Menu A Phase Controller (or Phase Angle Controller) is
The (also known as the COCIS GMR-32B or part number 6060009) is an electronic power supply protection relay designed to safeguard three-phase motors and industrial equipment from electrical faults. This guide serves as a manual for its operation, installation, and technical specifications. Core Functions
| Red LED pattern | Meaning | Action | |----------------|---------|--------| | 1 blink / sec | Overcurrent >40A | Reduce load or adjust P3 | | 2 blinks / sec | SCR overtemperature (>85°C) | Improve cooling, check fan | | 3 blinks / sec | Missing phase on input | Inspect L1/L2/L3 fuses | | Continuous | Internal error | Cycle power; replace if persists |
Adjust the value using arrows, then press again to save. Here are some key points to consider: Replacement
Standard 35mm DIN rail (HT35) or screw mounting via M4 holes.
Connect the three-phase power lines here. The sequence matters for phase reversal detection.
is a specialized protection device designed to safeguard three-phase equipment—such as central air conditioners, industrial motors, and elevator systems—from electrical faults
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.