Nokia 7250 Ixr X1 Installation Guide

Before beginning the installation, ensure your environment meets the necessary structural, electrical, and environmental criteria. Electrical and Environmental Safety

Insert the AC power cord firmly into the IEC inlet on the first Power Supply Unit (PSU 1). Secure it using the wire retaining clip to prevent accidental disconnects. Connect the plug to the external AC power source grid.

If necessary, use two people to lift the chassis.

The X1 chassis weighs about 40 lbs (18kg) fully loaded. The box arrives looking like it survived a FedEx apocalypse, but Nokia’s packaging is military-grade. Save the foam inserts—you’ll need them if you ever have to RMA this thing.

Ensure the installation site has appropriate rack space, power supply, and environmental controls. nokia 7250 ixr x1 installation guide

Disclaimer: This guide is a summary. Always refer to the official Nokia documentation for the most accurate and up-to-date installation instructions.

: Connect the chassis to the site's common bonding network using a standard grounding lug and cable to ensure electrical safety and EMI containment. Power Connection : Insert the PSUs into the rear slots until fully seated.

Secure mechanical assistance or lift the chassis manually if safely within your lifting capacity. Align the bracket ears with the rack holes.

Category 5e/6 RJ-45 cables and compatible optical transceivers (SFP+/QSFP28/QSFP-DD) Connect the plug to the external AC power source grid

The router is built to support evolving network needs, making it an ideal solution for roles such as a high-performance leaf node in a data center fabric or a 5G interconnect point. It achieves this with a robust feature set that includes:

Before installing the chassis, ensure the environment meets the following requirements: : Reserve 1RU of space in a standard 19-inch rack.

Before handling the hardware, ensure your installation environment meets the physical and electrical prerequisites. Site Specifications

Always download the latest firmware from the Nokia Support Portal before deploying to production. Remember to register your device for warranty and support. The box arrives looking like it survived a

Route fiber optic cables and Ethernet cables through the cable management system. Ensure cables are not strained or kinked. 5.2 Connecting Power Verify again that the chassis is grounded. Connect Power Cables: Connect the cables to the PSUs.

: Connect to a -48V or -60V DC power source, ensuring correct polarity. 4. Connect Management and Console

System Booting... Running POST (Power-On Self-Test)... Passed. Loading TiMOS image... Filesystem initialization complete. Use code with caution. Basic Management IP Provisioning

Secure the power cable using the retention clip or Velcro strap to prevent accidental disconnects.