Yamatake Sdc20 User Manual (2027)

For connection details, consult the device driver manual provided by your HMI manufacturer.

Share public link

⚠️ Azbil requires you to submit a short information form before downloading manuals from its official site. This is a standard procedure to track document usage.

Displays the Process Variable (PV) or parameter contents. yamatake sdc20 user manual

Ensure the "Run/Stop" parameter is set to "Run" and check the output fuse. Conclusion

Push the controller through the panel cutout from the front side.

The user interface consists of two distinct LED displays and four tactile control keys. For connection details, consult the device driver manual

Warning: All wiring must be performed by qualified personnel. Always turn off the power supply before servicing. Power Supply The SDC20 operates on a wide range of power: (

ON/OFF control, PID control, and Heat/Cool dual control.

±0.5% of full scale ±1 digit (for most thermocouple and RTD ranges). Sampling Cycle: 500 milliseconds. 2. Mounting and Wiring Diagrams Displays the Process Variable (PV) or parameter contents

The SDC20 separates parameters into three functional layers to prevent accidental changes to critical hardware setups during routine operations. Mode Bank ( ModE )

This guide provides an overview of the SDC20’s features, wiring, and configuration to help you get the most out of your device. 1. Overview of the SDC20 Controller

Connect the external load across the Normally Open (NO) terminal (Terminal 3) and the Common terminal (Terminal 4). Use an external surge absorber for inductive loads.

The controller must be mounted in an indoor, dry, and dust-free panel. The SDC20 is designed for a cutout, while the SDC21 is for