Digi Sm-500 Scale User Manual -

Open the printer side door. Release the green thermal head lever. Slide the label roll onto the supply spindle, thread the backing paper through the peel sensor, and lock the lever back into place. Entering Calibration and Service Mode

: Access different modes (Registration, Programming, X/Z Reporting) by pressing specific key combinations, typically involving the [M] (Mode) and [RE-ZERO] keys. Programming PLUs : Enter Program Mode .

| Button | Label | Primary Function | |--------|-------|------------------| | ON/OFF | Power | Turn scale on/off | | TARE | Tare | Subtract container weight | | UNIT | Unit | Change weighing mode (g/oz/ct…) | | CAL | Calibrate | Enter calibration mode (hold 3-5 sec) |

: Step-by-step procedures for cleaning the thermal print head and clearing common errors to prevent downtime. Essential Operations digi sm-500 scale user manual

Slide the label roll onto the supply spindle, ensuring the labels feed face-up.

Remove the stainless steel platter and wash it with mild soapy water. Never spray water or chemical cleaners directly onto the scale base housing.

The Digi SM-500 operates in several modes protected by security configurations or specific key sequences. Open the printer side door

A: Yes, using the tare function. Place an empty cup on the scale, press TARE, then pour liquid. Do not spill liquid onto the scale body.

To help me locate specific configuration parameters or custom label formatting instructions, let me know your scale uses or if you are trying to connect it to a back-office PC software system (like MaxChain or Digi Store Manager). Share public link

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Entering Calibration and Service Mode : Access different

to accommodate the larger nutritional facts required for the house-made pasta.

Alternatively, on specific firmware versions, press the key while holding down the [RECODE] key. 5. PLU (Price Look-Up) Programming