Set the date and time manually or sync it immediately with your attendance server to prevent logging errors. To ensure your system is properly restored, let me know:
Resetting the ZKTeco UA300 depends on whether you have administrator access or need to bypass a lost password. The process can be done through the device menu, physical hardware overrides, or dedicated software tools. 1. Resetting via Device Menu (Admin Access Required)
If you still have administrator access to the device UI, this is the safest and most straightforward method to restore factory defaults. Turn on the ZKTeco UA300 device. Press the key to open the main menu.
If an administrator left the company or you forgot the password, you will be locked out of the device menu. You cannot access the factory reset option directly. Use this backdoor method to clear the admin lock. The Math Formula Backdoor Press the key. The screen will ask for an ID. zkteco ua300 factory reset
Select the option that clears both system settings and user data if you want a complete wipe.
. If she could connect the UA300 to her laptop via a network cable, she might be able to clear the admin through the "Device Management" menu. She connected the device to her network and opened the ZKTime 5.0 Software She added the device using its default IP, often 192.168.1.201 Device Management , she looked for Advanced Functions to find the elusive "Clear Admin"
Performing a factory reset will erase all data and settings on the device. Make sure to back up any important data before proceeding. Set the date and time manually or sync
Click . The software will send a command packet over the network, and the device will restart with factory configurations. Method 3: Resetting Without Admin Password (Locked Out)
Carefully open the plastic housing to expose the main circuit board (PCB).
Release the button, reassemble the casing, and let the device boot normally. Default Settings Post-Reset Press the key to open the main menu
Before performing a factory reset on your ZKteco UA300, make sure to:
Look for a button labeled or Initialize Device .