Phison Ps225107ps2307 Mptool Install (UPDATED →)

This procedure will completely wipe all data on the flash drive.

: Named with an FW07*.BIN format. Ensure the firmware extension matches your memory type: ends in 10 or 24 for MLC, 50 for TLC, and 53 for eD3 memory.

Browse and map the field to your downloaded BN07xxxx.BIN file.

To minimize communication errors during the flashing process, use a on the back of your computer's motherboard rather than front-panel ports or USB 3.0 ports. 1. Launch with Administrator Privileges

The journey began with the gathering of essential tools. Using ChipGenius phison ps225107ps2307 mptool install

If no drive appears: re-check the driver installation (Part 2, Step 3).

If the software registers a "No Media" loop or fails to detect the drive completely, the controller may be locked in a panic loop. You will need to carefully pry open the plastic casing of your USB drive, locate the Phison controller chip, and use a small needle or tweezers to short-circuit the data pins (typically pins 29 and 30) while plugging the device into the computer port. This forces the controller into a generic hardware ROM state, allowing MPTool to push firmware safely. To help you find the exact firmware files, let me know:

Select your corresponding NAND flash type (TLC/MLC) found during Step 1. Move to the Flash Setting tab: Check the box for Preformat . Check Firmware Update .

After downloading and unzipping the MPALL tool package, you will find several executable files. This procedure will completely wipe all data on

Extract the contents of your downloaded MPTool ZIP archive into this folder.

Extract the MPALL distribution (e.g., v5.13.0C or v5.03.0A) to a local folder. Configure the Tool: MPParamEdit_F1.exe to create a configuration file ( Controller dropdown, select Select "Basic Adjustment" and "New Configuration". Input the correct VID and PID (commonly for Kingston). Connect the Drive: Plug your USB drive into a USB 2.0 port

Set the to match the USB generation you are using (prefer USB 2.0).

Using the wrong .fw file can permanently damage the drive. Ensure the files match the flash type (e.g., Toshiba TLC) identified in the pre-check USBDev. Browse and map the field to your downloaded BN07xxxx

Click the button on the right-hand menu. Your corrupted USB flash drive should populate one of the status grid boxes in yellow or white text.

Before starting, identify your flash drive's controller and memory chip details using a tool like to ensure compatibility.

is a popular, cost-effective flash controller used in many USB 3.0/3.1 flash drives (e.g., Toshiba, Kingston, Patriot).

Here is a review of the tool and the installation process.

Once the process achieves a green status bar, unplug the USB drive, wait 5 seconds, and reinsert it. Windows will prompt you to format a brand-new, completely revived storage drive.