Internal matrix bracing is vital. A 12-inch woofer generates massive internal pressure; unbraced walls will flex, causing phase cancellation and loss of acoustic output. Cabinet Geometry (The Trapezoidal Wedge)
Designing a 12-inch line array box requires choosing components that maximize efficiency, handle high power, and fit tight physical constraints. Woofer Selection (Low/Mid Frequency)
): 55 Hz – 65 Hz. Tuning the box higher protects the woofer from over-excursion and prioritizes maximum SPL in the vocal range. Low-frequency extension below 60 Hz is handed off to dedicated ground-stacked or flown subwoofers.
(PS112 ND3) that can be adapted. It includes dual-gap woofer specs and passive crossover schemes. Eighteen Sound Dual 12-Inch Line Array Module : This technical spec sheet on
Common compression driver choices include and Eminence , crossed over to the woofers at frequencies like 1,600 Hz .
Neodymium reduces total array weight, which is critical for safe rigging. Look for drivers with smooth response up to 1.5 kHz. 1.4-inch or 2-inch exit neodymium compression drivers.
12-inch Neodymium woofer with a 3-inch or 4-inch voice coil. Neodymium is preferred to reduce total rigging weight. Frequency Range: 55 Hz to 400 Hz.
12 Inch Line Array Box Design Pdf __exclusive__ Jun 2026
Internal matrix bracing is vital. A 12-inch woofer generates massive internal pressure; unbraced walls will flex, causing phase cancellation and loss of acoustic output. Cabinet Geometry (The Trapezoidal Wedge)
Designing a 12-inch line array box requires choosing components that maximize efficiency, handle high power, and fit tight physical constraints. Woofer Selection (Low/Mid Frequency) 12 inch line array box design pdf
): 55 Hz – 65 Hz. Tuning the box higher protects the woofer from over-excursion and prioritizes maximum SPL in the vocal range. Low-frequency extension below 60 Hz is handed off to dedicated ground-stacked or flown subwoofers. Internal matrix bracing is vital
(PS112 ND3) that can be adapted. It includes dual-gap woofer specs and passive crossover schemes. Eighteen Sound Dual 12-Inch Line Array Module : This technical spec sheet on Woofer Selection (Low/Mid Frequency)
): 55 Hz – 65 Hz
Common compression driver choices include and Eminence , crossed over to the woofers at frequencies like 1,600 Hz .
Neodymium reduces total array weight, which is critical for safe rigging. Look for drivers with smooth response up to 1.5 kHz. 1.4-inch or 2-inch exit neodymium compression drivers.
12-inch Neodymium woofer with a 3-inch or 4-inch voice coil. Neodymium is preferred to reduce total rigging weight. Frequency Range: 55 Hz to 400 Hz.
