Once completed, the status box will turn Green and display "OK" or "Pass". If it turns Red , the process failed, and you will need to try an alternative firmware version or configure a deeper scan level.
If the flashing fails mid-way, check the error code. "Bad Block Over" means the physical memory chips are too degraded to hold the firmware. If it says "Unrecognized Flash ID", you need to download a newer version of the FirstChip MPTool that includes updated firmware definitions for your specific memory chip.
: Another reputable repository for USB tools. How to Repair Your FC1179 USB Drive (Step-by-Step) firstchip fc1179 firmware link
Plug your corrupted USB drive into a USB 2.0 port (USB 2.0 provides more stable data transmission for diagnostic tools).
This is the most comprehensive database. Look for the FirstChip FC1178/FC1179 MpTool page. Once completed, the status box will turn Green
Flash drives often fail when the translation layer (the map the controller uses to find data) becomes corrupted.
The FirstChip FC1179 MpTools Portal hosts up-to-date versions like MpTools V1.0.7.2, which improves support for modern single-core architectures and various 3D Flash types. "Bad Block Over" means the physical memory chips
You cannot download just a ".bin" firmware file; you must download the entire suite, which contains the firmware matching your specific NAND flash memory.
Once you have followed a firmware link above and extracted the folder, look for an executable file named MpTool.exe or FirstChip_MpTool.exe . 1. Launch and Configure the Tool
You will need this if the MP Tool doesn't automatically recognize your NAND memory chip. How to Flash the Firmware
A: Yes – FC1179 firmware flashing will restore the true capacity (e.g., 16GB). Use "Normal Mode" to avoid over-provisioning.