Ion Setup 3.2 Jun 2026

ION Setup is a Windows-based software designed to simplify the setup of Schneider Electric power meters. It provides a visual interface for:

If you can tell me you are working with (e.g., ION7650, PM8240), I can help you find the exact configuration steps for your project. Share public link

Modify basic parameters including current transformer (CT) and potential transformer (PT) ratios, system frequencies, and demand communication settings.

: To see your app in a browser:

Within this mode, engineers can link the output of one module into the input of another. For example, you can route a high-voltage alarm event directly to a physical digital output relay to instantly trip an external circuit breaker or activate a local warning beacon. Troubleshooting Common Connection Errors Probable Cause Corrective Action Incorrect COM port assignment or misconfigured baud rate. ion setup 3.2

Establishing communication is the most critical step in using ION Setup 3.2. The software supports Serial (Modbus RTU), Ethernet (Modbus TCP/ION), and Modem connection architectures. Step 1: Create a Network Structure Open ION Setup 3.2.

: For serial connections, verify that the baud rate, parity, and stop bits are identical on both ends.

: Offers an intuitive interface to configure complex power meters like the PowerLogic PM8000 and ION9000 series without deep programming knowledge.

Once launched, will scan common directories ( /usr/bin/ , /usr/local/php/ , C:\php\ , etc.). It lists every PHP installation found, distinguishing between multiple versions (e.g., PHP 7.4 vs PHP 8.1). ION Setup is a Windows-based software designed to

When ION Setup 3.2 was current, the typical operating environment included:

(latest release v3.2.26126.01 as of May 2026) is the premier, free software tool from Schneider Electric designed specifically for configuring, verifying, and troubleshooting PowerLogic meters and other intelligent electrical devices. As a crucial component of modern energy management systems, it acts as a user-friendly interface that simplifies complex meter programming.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Solved: ION Setup 3.2 - Schneider Electric Community

You have two options:

Double-click the meter device to connect. Once the Setup Assistant loads, prioritize the following foundational settings to ensure accurate billing and safety metrics:

The final screen shows a green checkmark if successful. You can also verify manually by creating a phpinfo() file. Look for the "ionCube" section – it should display the Loader version (e.g., v12.2.2) and "Supported" status.

The Ion Setup software utility is a critical tool for configuring, monitoring, and troubleshooting Schneider Electric’s PowerLogic ION series power meters. Whether you are an industrial automation engineer, a facility manager, or a power quality specialist, mastering this software is essential for maintaining an accurate and reliable power monitoring network.

The .so or .dll file is not found. Fix: Run Ion Setup 3.2 again and use the "Advanced" tab to manually point to your extension_dir . Verify extension_dir = "./ext" or a full path in php.ini . : To see your app in a browser: