ASTM D6307 determines the asphalt content of hot-mix asphalt (HMA) by burning off the binder in an ignition furnace at approximately
Compare ASTM D6307 directly with its European equivalent, . Share public link
ASTM D6307, titled "Standard Test Method for Asphalt Binder Content of Asphalt Mixture by Ignition Method," outlines the procedure for determining the percentage of bitumen or asphalt cement in a paved mixture.
The test procedure involves several steps: astm d6307 pdf
The official ASTM D6307 PDF outlines two main approaches: (using an automated internal balance furnace) and Test Method B (using a manual external balance furnace). Method A is the industry standard due to its automation. Step 1: Sample Preparation
Engineers, laboratory technicians, and quality control managers frequently search for the to understand the exact testing protocols, equipment specifications, and safety measures required to run this test accurately. What is ASTM D6307?
The information obtained from ASTM D6307 is vital in the field of civil engineering and construction. It allows engineers and technicians to: ASTM D6307 determines the asphalt content of hot-mix
The asphalt mixture sample must be heated in a standard oven until it is soft enough to be split into the appropriate test size. The required sample mass depends directly on the nominal maximum aggregate size (NMAS) of the mix. For example, a fine mix might require only 1,200 grams, while a coarse mix may require up to 4,000 grams to ensure statistical accuracy. 2. Establishing the Correction Factor
ASTM D6307 provides a rapid, repeatable, and accurate method to verify that production plants are outputting the correct mix design before the asphalt is paved on public highways. Furthermore, after the burn is complete, the remaining pristine aggregate can be used for a subsequent sieve analysis (ASTM C136) to check the aggregate gradation. Accessing the Official ASTM D6307 PDF
is a standard test method developed by ASTM International. Its full title is the "Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method." This method is used to find out how much asphalt cement (the binder) is in a sample of asphalt mixture or pavement. It works by burning off the asphalt in a special furnace at high temperatures. This modern technique does not use solvents, making it faster and better for the environment compared to older extraction methods. The remaining aggregate can also be used for gradation analysis following another standard, D5444. Method A is the industry standard due to its automation
Asphalt Content of Asphalt Mixture by Ignition Method - CCIL
The apparatus required for conducting the test according to ASTM D6307 includes a pressure gauge, a test chamber, and necessary seals and fittings. The calibration of the equipment is critical to ensure the accuracy of the measurements.
Requires lengthy washing and drying cycles.
High-temperature heat-resistant gloves, a full-face shield, and a well-ventilated fume hood or exhaust system to safely vent combustion gasses. The Step-by-Step ASTM D6307 Testing Procedure
Downloading copyrighted standards from unauthorized sources is a violation of intellectual property laws. Purchasing the official PDF from ASTM or one of its authorized resellers is the only way to ensure you have a legal and correct copy. Also, the ASTM D6307-19 is copyrighted; any use of its text for AI training or other purposes without permission is strictly prohibited. Expect to pay for it; ASTM standards are copyrighted documents that must be purchased.